CURRENT INVENTORY

Inside our factory workshops, you can inspect the second-hand machines connected to the power supply. All machines are closely checked for correct functioning by our employees. In addition, we offer machines still in operation under production conditions, too.

 

machine type
brand
year
ID

multi spindle automatic lathes
Schütte / Index
0

we are looking for multi spindle automatic lathes

Schütte SF26 with CNC cross slide

Index MS22

Index MS32

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte / Index
0

We are searching for multi spindle automatic lathes

Schütte SF26S

Index G200

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte SF13/SF20/SE25
0

we are looking short term for multi spindle automatic lathes

Schütte SF13

Schütte SF20

Schütte SE25

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte SG18 / AG20
0

we are looking for multi spindle automatic lathes

Schütte SG18

Schütte AG20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte / INDEX
0

we are looking for multi spindle automatic lathes

Schütte AG20 as double-4, 2x thread cutting, 2x CNC cross slide, optional spindle stop

Schütte AF32 as double-4, 2x thread cutting, 2x CNC cross slide, optional spindle stop

INDEX/Schütte multi-spindle machine D40mm (SW32) with CNC backworking

INDEX G220 main spindle passage 90mm including tool changer

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte AF32S Dnt
0

we are looking for multi spindle automatic lathes

Schütte AF32S Dnt

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathe
Schütte SC9-32
0

we are looking short term for multi spindle automatic lathes

Schütte SC9-32

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathe
Schütte SF51
0

we are looking for multi spindle automatic lathes

Schütte SF51

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

cam controlled multispindle automatic lathe
Tornos
0

we are looking for multi spindle automatic lathes:

Tornos SAS 16.6

Tornos SAS 16 DC

Tornos Deco 20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathes
several
0

we are looking for multi spindle automatic lathes

Schütte SF 51
Schütte SF 51 S-Dnt
Schütte SF 32 S-Dnt
Schütte SF 26 S-Dnt
Schütte AG 20
AF 32
AF 32 S-Dnt
A 36 PC
und
Tornos SAS 16

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathes
Schütte, Index, Citizen, Star
0

We are currently looking for multispindle automatic lathes

Index MS 32
Index MS 42C
Index MS 40


and CNC-swiss-type automatic lathes

Citizen
Star

and Schütte machines


If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathes
Schütte
0

we are searching for multispindle automatic lathes

Schütte S 51 PC
Schütte A 36 PC

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

We are always searching for Schutte machines
Schütte

multispindle automatics like: SG18, AG20, SF26S Dnt, SF32S Dnt, SF51S Dnt,
AF32S Dnt, SFH 160S Dnt, AFH 130S Dnt, A36PC, S36PC, S51PC, SC6-32, SC7-32, SC9-32


tool grinders like: Schutte WU305 5-axis CNC grinder

machine type
brand
year
ID

multispindle automatic lathe
Schutte
0

we are looking for multi spindle automatic lathes:

Schütte SF32
Schütte AG20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte AFH130
0

we are looking for multi spindle automatic lathes

Schütte AFH130

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Index MS25M
0

we are looking short term for multi spindle automatic lathes

Index MS25M

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Index MS25
0

we are looking short term for multi spindle automatic lathes

Index MS25

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathe
Gildemeister GM 16-6
0

We are looking for turning lathes

Gildemeister GM 16-6

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

cam controlled automatic lathes
Schütte SF51
1988
61810

Article: cam-controlled multi-spindle automatic lathe with CNC-pickup
Manufacturer: Schütte
Type: SF51
Yob: 1988
six main spindles
for bars up to D=51mm
CNC-pickup in position 6 with rear CNC-machining;
electronic cam control Balluff;
independent feed position 4;
chip conveyor: magnetic belt;
oil/stee-running;
additional coolant pump with double filter (magnetic cartridge filter).
The machine tools shown and not listed are not part of the scope of delivery.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam controlled automatic lathes
Schütte AF51
1987
61829

Article: multi spindle automatic lathe
Manufacturer: Schütte
Type: AF51
Yob: 1987
eight main spindles
max. bar diameter D=51mm
control SIEMENS SIMATIC S5
pick up in pos. 7, for rear machining
thread cutting drive
independent feed in positions 2/3
electronical trip dog control “Balluff”
clear text display Wöhrle
coolant pump
magnetic cartridge filter
oil running
incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)
Painting in light blue and light grey
The configuration of tooling will be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Cam controlled multi spindle automatic lathe
Schütte AF32DNT
1993
61894

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: AF32 Dnt
Yob: 1993
eight-spindle automatic lathe
eight main spindles
for bars up to D=32mm
Modernized control: Siemens Sinumerik
Motors: renewed modern motors suitable for modernized control system
Electronic trip dog control: Balluff
CNC cross slide position 5 cross
CNC cross slide position 6 cross
Preparation for gripper in position 8 (gripper optional)
Independent feeds
Thread cutting couplings
integrated bar loader: Pietro CUCCHI; type: rack type magazine
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Cam controlled multi spindle automatic lathe
Schütte SF51 DNT
1987
61868

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF51 DNT
Yob: 1987
Six-spindle automatic lathe with 6 main spindles
max. nominal diameter D=51mm
electronic cam control Balluff
gripper in position 6 for backworking, sorting chute
independent longitudinal feed layer 5
screw chip conveyor
Tapping couplings
Interface for: Bar feeder IEMCA PRA
Bar feeder IEMCA PRA40/33/F
Scope of delivery without the blue chip conveyor
The tooling will differ from the scope of delivery!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Cam controlled multi spindle automatic lathe
Schütte AF32 S DNT
1994
61871

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: AF32 S DNT
Yob: 1994
Eight-spindle automatic lathe with 8 main spindles
max. nominal diameter D=32mm
control: Siemens SIMATIC S7
electronic cam control Balluff
gripper in position 8 for backworking
CNC cross slide position 6
CNC cross slide position 7
Workpiece belt
Coolant cooling Schimpke
Chip conveyor with magnetic separator
Tapping couplings
The tooling shown may differ from the scope of delivery!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam-controlled multi-spindle automatic lathe
Schütte SF26S
1996
61911

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF26S
Yob: 1996
six-spindle automatic lathe
six main spindles
for bars up to D=26mm
hirth- coupled spindle drum,
Siemens control, Balluff electronic trip dog control
pick up for rear machining in position 6,
tapping couplings,
prepared mechanical interface for: IEMCA PRA bar feeder (IEMCA not included in scope of delivery)
Coolant tank with chip conveyor
The tooling in the scope of delivery may differ from the pictures.
The machine could be visited under power.
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam-controlled multi-spindle automatic lathe
Schütte SF26S
1996
61912

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF26S
Yob: 1996
six-spindle automatic lathe
six main spindles
for bars up to D=26mm
hirth- coupled spindle drum,
Siemens control, Balluff electronic trip dog control
pick up for rear machining in position 6,
tapping couplings,
prepared mechanical interface for: IEMCA PRA bar feeder (IEMCA not included in scope of delivery)
Coolant tank with chip conveyor
The tooling in the scope of delivery may differ from the pictures.
The machine could be visited under power.
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam-controlled multi-spindle automatic lathe
Schütte SF26S
1997
61913

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF26S
Yob: 1997
six-spindle automatic lathe
six main spindles
for bars up to D=26mm
hirth- coupled spindle drum,
Siemens control, Balluff electronic trip dog control
pick up for rear machining in position 6,
tapping couplings,
prepared mechanical interface for: IEMCA PRA bar feeder (IEMCA not included in scope of delivery)
Coolant tank with chip conveyor
The tooling in the scope of delivery may differ from the pictures.
The machine could be visited under power.
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam-controlled multi-spindle automatic lathe
Schütte SF26S
1998
61914

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF26S
Yob: 1998
six-spindle automatic lathe
six main spindles
for bars up to D=26mm
hirth- coupled spindle drum,
Siemens control, Balluff electronic trip dog control
pick up for rear machining in position 6,
tapping couplings,
prepared mechanical interface for: IEMCA PRA bar feeder (IEMCA not included in scope of delivery)
Coolant tank with chip conveyor
The tooling in the scope of delivery may differ from the pictures.
The machine could be visited under power.
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam-controlled multi-spindle automatic lathe
Schütte AF42
1992
61918

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: AF42
Yob: 1992
eight-spindle automatic lathe
eight main spindles
for bars up to D=42mm
2x4: Double-four operation possible!!!
2x gripper
electronic cam switch unit: Balluff
Interface for: IEMCA PRA bar loading magazine
(optional I: IEMCA PRA40/42/F bundle loading magazine)
The machine could be visited under power.
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

We are always searching for INDEX machines
INDEX

multispindle automatics like : MS22C, MS32C, MS32P, MS32G, MS40C, MS42C, MS52C, MS52G
cnc one spindle turning machines like: ABC,...
turn-mill centers like: G200, G300,...

machine type
brand
year
ID

multi spindle automatic lathe
Index MS22
0

we are looking for multi spindle automatic lathes

Index MS22

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

turn-mill centres
Index
0

we are searching for turn-mill centres, not older than 10 years:

Index C200

Index G200

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

CNC Lathe
INDEX ABC 60
1999
61905

Article: CNC lathe
Manufacturer: INDEX
Type: ABC 60
Year of construction: 1999
Control: C200-4
spindle diameter: D60mm
max. speed: 5.000 rpm
tool turret: 2 pieces
Loading magazine: CUCCHI Giovanni DB-EVO 70
Chip conveyor: Hinged belt conveyor
Other: Pick-up unit on turret 1, driven tools, chip conveyor,
High pressure 20bar. on turret 1

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

We are always searching for Tornos machines
Tornos

multispindle automatics like : SAS16.6, MultiDeco 20/6b, MultiDeco 20/8b, MultiDeco 32/6i, MultiAlpha 6x32, MultiAlpha 8x26, MultiSigma 8x24


cnc one spindle turning machines like: Deco 20a,...

machine type
brand
year
ID

multi spindle automatic lathes
Tornos BS20
0

we are looking for multi spindle automatic lathes

Tornos BS20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
Tornos MultiSwiss 8x26
2016
61861

Article: CNC-controlled multi-spindle automatic lathe
Manufacturer: Tornos
Type: MultiSwiss 8x26
Yob: 2016
full cross slide configuration,
counter spindle,
part-pre-drawing device,
2 x driven tools,
3 x Y-axis,
1 rigid backworking,
1 x driven backworking,
2x 80 bar high pressure pumps
optional: setting robot, manufacturer HandlingTech.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
Tornos MultiSwiss 8x26
2019
61862

Article: CNC-controlled multi-spindle automatic lathe
Manufacturer: Tornos
Type: MultiSwiss 8x26
Yob: 2019
full cross slide configuration,
counter spindle,
part-pre-drawing device,
2 x driven tools,
1 rigid backworking,
1 x driven backworking,
2x 80 bar high pressure pumps
optional: setting robot make HandlingTech.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC sliding headstock automatic lathe
Tornos Deco 2000/20
2001
61906

Article: CNC sliding headstock automatic lathe
Manufacturer: Tornos
Type: Deco 2000/20
Year of construction: 2001
Control: Fanuc
spindle diameter: D25 mm
max. speed: 7000 rpm
comb: 2 (X,Z,Y-axis)
Front attachment: 1 (X,Z,S-axis)
Loading magazine: Tornos Robobar SSF
Chip conveyor: Hinged belt conveyor
other: various accessories such as polygonal impact device, HF spindle

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC automatic lathe
Tornos EvoDeco 16/10
2015
61908

Article: CNC automatic lathe
Manufacturer: Tornos
Type: EvoDeco 16/10
Year of construction: 2015
CNC axes: 10
The machine has a very extensive equipment - 4 rotating tools, which offer very large machining possibilities.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC automatic lathe
Tornos Sigma 20/6
2015
61909

Article: CNC automatic lathe
Manufacturer: Tornos
Type: EvoDeco 20/6
Year of construction: 2015
CNC axes: 6
It has 6 numerically controlled axes, rotating tools that work together with both the main spindle and the counter spindle.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

We are always searching for GILDEMEISTER machines
Gildemeister

multispindle automatics like GM 20, GM 16, GM 35, GMC 20, GMC 20 ISM linear, GMC 25 ISM linear, GMC 35 ISM linear, GMC 42 ISM linear


swiss types like Sprint 32 linear, Sprint 42 linear, Sprint 20 linear, Sprint 50 linear, Sprint 50-2T, Sprint 50-3T

machine type
brand
year
ID

multi spindle automatic lathes
DMG Multisprint 36
0

We are searching for turning lathes

DMG Multisprint 36 for chuck part machining

If you want to sell your machine, please call us. We gladly submit an offer.

machine type
brand
year
ID

turning and milling centre
DMG MORI NT4300 DCG/1500
0

we are looking for a  turning and milling centre

DMG MORI NT4300 DCG/1500 with 2 turrets


If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathe
Gildemeister
0

We are looking for turning lathes

Gildemeister GM 16-6

Gildemeister GM 20-6

Gildemeister GM 32-6

Gildemeister GM 35-6

Gildemeister GM 42-6

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

CNC turning and milling centre
Doosan MX 2100 ST
0

we are looking for a CNC turning and milling centre

Doosan MX 2100 ST

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

programme-controlled automatic lathe
Traub TF60 / 140
1978
61869

Article: Programme-controlled automatic lathe
Manufacturer: Traub
Type: TF60 / 140
Yob: 1978

Bar automat

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC Lathe
Spinner BK-CNC
0
61898

Article: CNC Lathe
Manufacturer: Spinner
Type: BK-CNC
Year of construction: currently not known, estimated 1990
Control: SIEMENS SINUMERIK 810T
Bar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?
Tool turret: Manufacturer Sauter
Machine has processed plastic
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC Lathe
Spinner SB-CNC
0
61897

Article: CNC Lathe
Manufacturer: Spinner
Type: SB-CNC
Year of construction: currently not known, estimated 1990
Control: SIEMENS SINUMERIK 810T
Bar passage: measured approx. Ø 34.6mm -> nominal Ø 32mm?
Tool turret: Manufacturer Sauter
Machine has processed plastic
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC Lathe
Hanwha STL38H
2013
61904

Article: CNC lathe
Manufacturer: Hanwha
Type: STL38H
Year of construction: 2013
Control: Siemens 840SL for 8 axes

Main spindle:
max. turning diameter: 38mm; spindle bore max. 42mm, n max. 6,500 rpm
Power max. 23 kW; C-axis with 0.001 degree; stroke Z1 320mm; synchronised guide bush unit; guide bush type JBS or SL38; type collet 173E / F48
Counter spindle:
max. pick-up diameter: 38mm, n max. 6,500 rpm
Power max. 23 kW; C-axis with 0.001 degree; stroke Z2 320mm; type collet 171E / F42
Tool turret:
n max. 6,000 rpm
Power max. 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120
Bar feeder FMB Turbo 5-55
High-pressure station SFB-301 eco 150bar

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC automatic lathe
Mazak QT8
1986
61907

Article: CNC automatic lathe
Manufacturer: Mazak
Type: QT8
Year of construction: 1986
Control: Mazatrol
Number of turrets: 1 (with 12 stations)
max. spindle passage: Ø32mm
max. chuck capacity: Ø160mm
chip conveyor: hinged belt conveyor
Other: probably the spindle decoder is defective!!!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

bar loader
CUCCHI DBM 21/36
0
61771

Bar loading magazine for multi spindle automatic lathe Schütte SG18, factory new

Special offer! Test phase on your machine in D/A/CH/BeNeLux possible!

Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle Schütte SG18
Type: DBM 21/36
Design: lateral loading magazine / integral loading magazine
Yob: 2021
length of bars: 33000mm
Total length: approx. 3680mm
Bar stock: approx. 680mm
Optimized loading time (modification to Schütte may also be required) 12-14 seconds (total loading time).
There are several pieces brand new and immediately available.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
subject to sale and mistakes

machine type
brand
year
ID

loading magazine for Tornos SAS16
Cucchi DBM17/36
2022
61835

loading magazine for Tornos SAS16, like new -unique offer-
This loading magazine CUCCHI GIOVANNI Mod. DBM 17/36 is built for use on a Tornos SAS16, but only used ½ year. The year of manufacture of the loader will be 2022/23.
Secure this unique offer at top conditions!

bar length 3,30 m
incl. remote maintenance; control voltage 24V
Standard paint RAL7035

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
subject to sale and mistakes

machine type
brand
year
ID

Automatic bar loading magazine
CUCCHI DB-EVO
0
61738

TEST the new DB-EVO bar loader
4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)
very high speeds even with profile material

Manufacturer: Giovanni Cucchi
Machine type: Automatic bar loading magazine for single-spindle / short turning
Type: DB-EVO
Design: Surface loading magazine or bundle loading magazine
diameter range: 20-110mm

DB-EVO at a glance:
Scope of delivery and optionally orderable functions:
- oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional
- Monitoring and fault diagnosis (touch screen)
- Surface magazine
- Bundles and other variants possible
- automatic loading of short bars
- Trays for tools
- low power consumption (start/stop function)
- Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6.1 meter rod length - Special lengths on request
- Also available in special designs (e.g. unloading function, stamp, etc.)
- Also available with bundle loading
- Optional shifting device

The advantages of DB-EVO barfeeders at a glance:
- oriented loading of the bar material possible (e.g. edge upwards)
- dry running - no oil flow
- significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel
- very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles)
- short remaining pieces, as no clamping sleeve is used
- very short charging time (charging process still during machining)
- solid construction
- very low wear of the guide channel
- external loading - therefore no stop for new bars necessary, low power consumption (start/stop function)

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Bar loading magazine
CUCCHI DBM/DBMF
0
61739

Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: DBM/DBMF
Design: Surface loading magazine or bundle loading magazine
diameter range: 6-67mm

DB-EVO at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking them on the machine for changing feed grippers and cleaning work. These magazines do not require bar tubes on the machine and are bolted directly to the machine (see pictures).
It is possible to work in automatic mode as well as in manual mode. In the event of any malfunctions, the magazine can be used as a conventional bar guide tube. This eliminates machine downtime if service technicians are required.
These magazines have dry channel segments (no oil flow!). Therefore they are very quiet and vibration-free. Since the magazines are only in use during the loading cycle, they require less energy. CUCCHI GIOVANNI loading magazines are completely maintenance-free.

An overview of the advantages of DBM loading magazines for multi-spindle machines:
- very short loading time
- no oil flooding - dry running
- short design (e.g. 3670 mm for 3300 mm bar length)
- quick removal of the feed tube - simply push the loading magazine on rails away from the machine
- no downtime - bar material can be fed manually through the loading magazine into the machine in case of a malfunction
- new centring in the channel - also for small diameters < 6 mm
- short set-up times - quick changeover to the new diameter
- no scoring and scratches on sensitive surfaces due to plastic guides

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Bar loading magazine
CUCCHI CMSP/CMSPF
0
61740

Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: CMSP/CMSPF
Design: Side loader as surface loading magazine or bundle loading magazine

CMSP / CMSPF at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release.
These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode.
The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the magazine are changed.
The centering unit adjusts itself to the new diameter by itself. It dampens all kinds of vibrations during machining (suitable for round, square and hexagonal material!) and prevents the bar from forming an arc in the channel. This allows very high speed machining (even with larger diameters).
Quick changeover to the next diameter to be machined and a significant reduction of vibrations, due to the proven double centering, are only two of the many advantages of this system.

The advantages of CMSP/CMSPF barfeeders at a glance:
- short loading time
- optimal guiding of the bar material by double or, if necessary, triple centring device
- no oil flooding - dry running
- quick change of the diameter to be machined
- short design - space saving
- very low wear of the guide channel
- self-adjusting centring device
- significant reduction of vibrations

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Loading magazine for Schütte AG20
Pietro Cucchi
2000
61848

Article: loading magazine for Schütte AG20
Manufacturer: Pietro Cucchi
Type: surface loader
year of construction: 2000
for bar length 3000mm
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CHIRON machining centres
Chiron
0

We are able to offer you CHIRON machining centres.

machine type
brand
year
ID

Machine for cutting and double-endworking SIN-O-MATIC
Sinico
0

we are searching for a machine for cutting and double-endworking SIN-O-MATIC
Sinico TR55

machine type
brand
year
ID

Vertical turning and grinding centre
EMAG VSC 250 DS
2008
61827

Article: Vertical turning and grinding centre
Manufacturer: EMAG
Type: VSC 250 DS
Yob: 2008
Control: SIEMENS 840D
Grinding spindle speed: 30,000 rpm
Rotation spindle speed: 3,000 rpm
Tool places turret: 12
Cooler for spindle and machine bed cooling
Cooling lubricant - lifting station (no independent cooling lubricant supply)
Chip conveyor
Parts handling
Air through the spindle
Two clamping circuits through the spindle (air and oil)

Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

rotary table machine
Mikron Multifaktor MFT
0

 

We are looking for

Mikron Multifaktor MFT 60-12
Mikron Multifaktor MFT 60-10
and
Pfiffner Hydromat


If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

Rotary machine
Eubama S-21
0

we are looking for a rotary machine:

Eubama S-21

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

Rotary machine
Eubama S-6
0

we are looking for a rotary machine:

Eubama S-6

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

Rotary transfer machine
Pfiffner Hydromat HB32-45/16 CNC
2013
61895

Article: Rotary transfer machine
Manufacturer: Pfiffner
Type: Hydromat HB 32-45/16 CNC
Yob: 2013
Electro-hydraulically controlled, fully automatic

Extract from offer:

Coolant system with chip conveyor and Knoll vacuum rotation filter
High pressure pump 50 bar
Second coolant ring
Water cooler type 1600
Collets type B32-45 UP
Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice)
1 bar loading magazine type IEMCA: bundle loader (yob. 2011)
1 Sawing unit: Saw blade D250mm
2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32
2 Vertical support 26/80 with 36° angular position
2 drilling head 26/80-HSK: HSK 32
1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40
4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply
6 Drilling head 36/1000-HSK: HSK 40
2 CNC X-Y-Z turning device outside the collet disc: NC 26/100 pick-up unit; 2 deburring spindles
1 CNC horizontal cross slide 26100-HSK: X/Y stroke
1 CNC feed unit VE 36/100-HSK internal cooling: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply
2 CNC turning unit 50/100-PSK: with ES-PDK-12 facing head (slide-in 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW
1 turning unit WDE 30/60
1 turning tube with insertion bar
3 chip breaker valve SBV-100
Tool monitoring

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

transfer machine
Mikron Multistep XS
2007
61759

Article: transfer machine
Manufacturer: Mikron
Type: Multistep XS
Yob: 2007
Number of modules: 4
Number of spindles: 6
Control: Bosch Rexroth MTX
Coolant unit: Knoll VRF450/2100
Extraction: Elektrostat / LTA
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

tool presetter
Kelch
0

we are looking short term for tool presetter

Kelch Trabant

Kelch Sirius

alternate with revolving table 700mm

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

Reduction
Mapal HSK T50 / Capto C3
0
3128

Article: reduction
Manufacturer: Mapal
Type: HSK-T50 /Capto C3
for tool presetting
Schutte Material no. 7.55.02.77.9 Mapal 30249365
For example for use with Schutte multi-spindle automatic lathes SCX
Schutte SC7-32, Schutte SC7-46, Schutte SC9-32, Schutte SC9-46, Schutte AC9-36, Schutte AC10-36
Can also be used with other machine types
Only for sale in a package with #3127, #3129, #3130 and #3133.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Reduction
Mapal HSK-T50 / HSK-T32
0
3129

Article: reduction
Manufacturer: Mapal
Type: HSK-T50 / HSK-T32
for tool presetting
Schutte Material no. 7.57.27.49.8 Mapal 30508307
For example for use with Schutte multi-spindle automatic lathes SCX
Schutte SC7-32, Schutte SC7-46, Schutte SC9-32, Schutte SC9-46, Schutte AC9-36, Schutte AC10-36
Can also be used with other machine types
Only for sale in a package with #3127, #3128, #3130 and #3133.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Reduction
Mapal HSK-T50 / HSK-T40
0
3130

Article: reduction
Manufacturer: Mapal
Type: HSK-T50 / HSK-T32
for tool presetting
Schutte Material no. 7.54.72.72.7 Mapal 30208345
For example for use with Schutte multi-spindle automatic lathes SCX
Schutte SC7-32, Schutte SC7-46, Schutte SC9-32, Schutte SC9-46, Schutte AC9-36, Schutte AC10-36
Can also be used with other machine types
Only for sale in a package with #3127, #3128, #3129 and #3133.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Clamping block
Mapal HSK-T50
0
3133

Article: clamping block
Manufacturer: Mapal
Type: HSK-T50
for tool presetting
Schutte Material no. 7.54.72.71.6 Mapal 30208344
For example for use with Schutte multi-spindle automatic lathes SCX
Schutte SC7-32, Schutte SC7-46, Schutte SC9-32, Schutte SC9-46, Schutte AC9-36, Schutte AC10-36
Can also be used with other machine types
Only for sale in a package with #3127, #3128, #3129 and #3130.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Adjustment master
Kelch HSK32x25x125
0
3236

Adjustment master Kelch HSK32x25x125 for tool presetting, used
Kelch material no. 418.0001.340 DIN69893C; 1102/033000

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Adjustment master
Kelch Capto C3
0
3237

Adjustment master Kelch Capto C3 for tool presetting, used
Kelch material no. 10127336

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Grinding Machine
Schaudt Mikrosa Kronos S250
0

we are looking for grinding machines:

Schaudt Mikrosa Kronos S250

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

Lanner Anlagenbau
Lanner
0

We are sales partner of Lanner Anlagenbau GmbH.

machine type
brand
year
ID

Batch centrifuge
Lanner ME61-2
0
61398

Article: Batch centrifuge
Manufacturer: Lanner
Type: ME61-2
for deoiling of metal chips
-turnkey delivery and easiest handling
-very long service life, operation free of vibrations
-compact and easy to maintain, i.e. low maintenance costs and quick return of investment
-standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control
-including control cabinet laterally placed, i.e. not in swivel range of crane
-drum volume 100 Liter/max. 200 kg
-rotation speed max. 740 min-1
-power 5,5 kW
Painting:
RAL 5012 light blue (batch wringer, crane support)
RAL 1003 signal yellow (traverse)
RAL 7035 light grey (control cabinet)
In each case silk gloss. Changes after consultation.
Also included in the scope of delivery:
-Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge.
-Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use
-Lifting beam: for lifting the insert drum.
-Documentation on CD-ROM and in paper form
Optional for extra charge:
-Additional insert drum with pivot, perforation: ø 3 mm
-Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Batch Centrifuge
Lanner ME41-2
0
61733

Manufacturer: Lanner
Machine type: Batch Centrifuge
Type: ME41-2
for deoiling of metal chips
-turnkey delivery and easiest handling
-very long service life, operation free of vibrations
-compact and easy to maintain, i.e. low maintenance costs and quick return of investment
-standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control
-including control cabinet laterally placed, i.e. not in swivel range of crane
-drum volume 35 Liter/max. 50 kg
-rotation speed max. 980 min-1
-power 2,2 kW
Painting:
RAL 5012 light blue (batch wringer, crane support)
RAL 1003 signal yellow (traverse)
RAL 7035 light grey (control cabinet)
In each case silk gloss. Changes after consultation.
Also included in the scope of delivery:
-Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge.
-Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use
-Lifting beam: for lifting the insert drum.
-Documentation on CD-ROM and in paper form
Optional for extra charge:
-Additional insert drum with pivot, perforation: ø 3 mm
-Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

DELTA TECHNIK Filtersysteme GmbH
Delta Technik filter system
0

Article: filter system
Manufacturer: DELTA TECHNIK Filtersysteme GmbH
You receive from us DELTA TECHNIK filters for filtering hydraulic and cutting oil
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

mobile finest oil filtering technology
DELTA TECHNIK M130
0
3102

Manufacturer: DELTA TECHNIK
Machine type: mobile finest oil filtering technology
Type: M130
The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities.
The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better
technical data M 130
flow oil: bis 1.050, 1.500, o. 2.100 liter/hour
dimensions: height:  ca. 1.175 mm, width: 585 mm, depth: 811 mm
weight: ca. 93 kg
video link: https://youtu.be/niMq8BTTAok
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

mobile finest oil filtering technology
DELTA TECHNIK M120
0
3101

Manufacturer: DELTA TECHNIK
Machine type: mobile finest oil filtering technology
Type: M120
Technical oils serve just one purpose: It should run smoothly.

After all, a machine downtime costs you time and money.
Our filter technology was developed in order to optimize
machine running times.
Ultra-fine filter technology – for the sake of your machines
In order to achieve a high level of purity we offer the
appropriate technology for the different oils and application
areas:
- in order to achieve the best purity class
- under the aspect of economy
Finest filter technology
Our systems maintain the oil of your machines so that the
necessary oil purity is secured:
- Ultra fine filtration of technical oils up to 1µm
- Extremely long service life of the filters with up to 2.000 hours
- High capacity to absorb water with up to 5 liters
- Before starting up
- Mobile for maintenance intervals on several machines
- In the oil circuit during runtime operation
technical data M 120
flow oil: bis 1.050, 1.500, o. 2.100 liter/hour
dimensions: height:  ca. 1.175 mm, width: 585 mm, depth: 595 mm
weight: ca. 86 kg
video link: https://youtu.be/niMq8BTTAok
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Deburring and fine grinding machine for sheet metal / flat material
Costa MD4
0
61864

The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.
Working height: variable from 0,5mm – 150mm adjustable
Working width: 1150 mm
Maximum part weight: 300 kg
Wide belts with abrasive belt unwinding: 2200 mm
As standard with vacuum hold system, optional with magnetic hold system
Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.
The machine structure can accommodate up to 3 internal machining units and an additional external machining unit.

Video-Link: https://www.youtube.com/watch?v=-8sR73yklVE

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Deburring and fine grinding machine for sheet metal / flat material
Costa MD5
0
61877

The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.
Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.
Working width: 1350 mm
Maximum part weight: 400 kg
Wide belts with abrasive belt unwinding: 2620 mm
As standard with vacuum hold system, optional with magnetic hold system
By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.
Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.
The machine structure can accommodate up to 3 internal machining units and an additional external machining unit.
The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Deburring and fine grinding machine for sheet metal / flat material
Costa MD6
0
61878

The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.
Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.
Working width: 1150 - 1350 mm
Maximum part weight: 500 kg
Wide belts with abrasive belt unwinding: 2620 mm
As standard with vacuum hold system, optional with magnetic hold system
By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.
Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.
The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units.
The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Deburring and fine grinding machine for sheet metal / flat material
Costa MD7
0
61879

The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces.
Machine is suitable for heavy-duty use.
Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts.
Working width: 650 - 1650 mm
Maximum part weight: 2000 kg
Wide belts with abrasive belt unwinding: 3250 mm
As standard with vacuum hold system, optional with magnetic hold system
By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life.
Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task.
The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units.
The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Finishing machine
PROFIN REDLINE DLK 3-4/2-W
2007
61902

Finishing machine, single-sided machining or double-sided machining, second-hand
3 FLAKKO units with 4 disc tools each:
Drive power 7.5kW
Spindle speed 300 - 2500 rpm
Feed speed 2-20 m/min
Wet machining
Tool diameter 230mm
Working width 400mm for single-sided machining
Working width 200mm for double-sided machining with turning device
Special magnetic inserts
designed for hot machining
IPC control with PLC
Connected load 3x 400V 50Hz
Connected load approx. 52 kW

Overhaul of all units with conversion to new 4-point bearing between 2021 and 2023.

Special-price 25.000 EURO, net -free loaded truck-

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Grinding line for double-sided deburring of sheet metal / flat material
Viet Grinding line
2001
61903

Article: Grinding line for double-sided deburring of sheet metal / flat material automated
Manufacturer: Viet
Yob: 2001
VIET wide belt sanding machines + automation from WUWER Fördertechnik:
feeding table
Automated infeed
Processing 1: Underside deburring / sanding with sanding belt
Processing machine: Viet VALERIA 1-INF.-1600 wide belt sanding machine
Further transport
Machining 2: Top side deburring / sanding with sanding belt
Processing machine: Viet VALERIA 1-SUP.-1600 wide belt sanding machine
Transport to separation
Stacking on destacking table / pallet
Suction gripper with vacuum pumps from Becker
Dust extraction: ESTA extraction technology, type MHI 56-99, with upstream spark traps
Workpiece width: up to 1,600 mm
Spare parts package
Current application: double-sided deburring of saw blades

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Wide belt sanding machine
Costa MD4-CV 1150
2024
61893

Article: Wide belt sanding machine
Manufacturer: Costa
Type: MD4 - CV 1150
Year of construction: 2024

Deburring machine with wide belt sanding unit and brush unit for metal processing e.g. after laser cutting, new & in stock
Effect. Working width: 1,150 mm
Workpiece thickness, nominal: 0.8 to 150 mm
Feed table with feed carpet,
infinitely variable feed speed: 0.5 - 10 m/min
1st work unit C20 wide belt sanding:
Sanding belt length 2,200mm
Grit set for electronic fine positioning of the contact roller, adjustment (0.01 mm)
Frequency-controlled drive motors for adjusting the sanding belt speed
Motor power: 11 kW
2nd working unit XVS-130 with brushes D130mm incl. COSTA-Lock
Main motor with frequency converter
Built-in options:
Schneider HMI-Vision - PLC control
Remote maintenance module
Device for forklift loading
Dust suction collector
Vacuum fan installed on machine stand;
Vacuum fan 7.5kW
Enlarged path of the eccentric shaft grinding cylinder

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

pickup
Schütte SG18
0

we are looking for one

pickup for Schütte SG18

If you want to sell your pickup, please call us or send us an email!

machine type
brand
year
ID

Spare parts and tool equipment
Index MS32
0
3166

Article: Spare parts and tool equipment
Manufacturer: INDEX
Type: MS32
Spare parts and tool equipment to use in INDEX MS32 multispindel automatic lathes
Many parts available, e.g.:
- Toolholder
- Driven working units
- Different motors
- Various spare parts
- Tool equipment
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Previous