ALTRI MACCHINARI E ATTREZZATURE

Maschinentyp
Fabrikat
Baujahr
ID

Eroding machine
Eroding machine
0

we are looking for eroding machines

If you want to sell your machine, please call us or send us an email!

Maschinentyp
Fabrikat
Baujahr
ID

Vertical eroding machines
Vertical eroding machines
0

We are searching for vertical eroding machines by order of a customer

- not older than 9 years
- working area L 400 x W 300 x H 250
- with electrode changer

If you want to sell your machine, please call us or send us an email!

Maschinentyp
Fabrikat
Baujahr
ID

Starting-hole eroding machines
Starting-hole eroding machines
0

We are searching for starting-hole eroding machines by order of a customer

- not older than 9 years

If you want to sell your machine, please call us or send us an email!

Maschinentyp
Fabrikat
Baujahr
ID

hinged belt chip conveyor
hinged belt chip conveyor
0

we are looking short term for a hinged belt chip conveyor for Schütte SF32 (with grey cast iron bed)

If you want to sell your machine, please call us or send us an email!

Maschinentyp
Fabrikat
Baujahr
ID

Eroding machine
Agietron AT-1U
1989
61847

Eroding machine, second-hand
year of manufacturing: 1989

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Maschinentyp
Fabrikat
Baujahr
ID

Dryer for plastic granulate
Koch Technik CTK110
2014
61901

Article: Dryer for plastic granulate
Manufacturer: Koch Technik
Type: CKT110
Control system: SIEMENS S7
Year of construction: 2014
possible dry air volume: 110 m³/h

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Maschinentyp
Fabrikat
Baujahr
ID

Small parts - cleaning system
BOUS "CeBeCo" SECURUS "D"
2016
61828

Small parts - cleaning system BOUS "CeBeCo" SECURUS "D" size 2 "S", used
from workshop, hardly any operating hours, 1A-TOP-CONDITION
Usable dimensions: approx. 800 mm diameter
Useful height: approx. 450 mm
Operating weight: max. 200 kg with evenly distributed load
Nozzles: flat jet
Pump: approx. 3 kW
2x heating: approx. 2x 6 kW
Thermostat: digital
Insulation: Terodem heat insulation
Detergent filling capacity: approx. 200 l
Power requirement for fan: approx. 0.25 kW
Power requirement for drive: approx. 0.12 kW
Power requirement for emptying pump: approx. 0.6 kW
Voltage: 230/400 V, 50 Hz PE/N
Control voltage: 24 V
Loading height: approx. 900 mm
Labelling: German
1. VAPOUR EXTRACTION
The unit is equipped with a vapour extractor, consisting of an electric low-pressure fan with intake connection. The scope of delivery ends at the outlet opening of the fan. From there an exhaust air line with condensation drain must be connected by  the customer. The fan is designed for 7 m line and 2 pieces of elbow.
2. ADJUSTMENT OF THE NOZZLE SYSTEM
the nozzles are partly supplied in a manually adjustable version (ball head) and two additional vertical nozzle strings are installed.
3. EMPTYING PUMP
for the most extensive emptying - operation in the control panel.
4. 2. COARSE FILTER BASKET
A second coarse filter basket is supplied.
5. LARGE ADDITIONAL CLEANING FLAP (V2A)
incl. stainless steel screen
incl. EPDM seal
6. HARDING PLUG
for the centrifugal pump MTR 15.
This plug is installed to enable faster dismantling of the submersible pump for cleaning purposes.
Without connection cable
The machine could be visited under power.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Maschinentyp
Fabrikat
Baujahr
ID

horizontal contour cutting machine
Günter Eiselt KONTUREX Standard
2003
61875

manufacturer: Günter Eiselt
Model: KONTUREX Standard
year of construction: 2003
cutting width: 1250 mm
cutting length: 3000 mm
Cutting height: 1300 mm
Wire length: 7400 mm
Table size 3000 x 1250 mm
horizontal contour cutting machine, including vacuum table and suction unit;
torsion-resistant steel frame construction, mobile table unit.
All data without guarantee (excerpt from catalogue text)

Price: 1.500 EURO, net. Pricing in EURO.

This is a used machine. All prices are understood net prices without, packing, loading, shipping or any dutys.

Delivery condition: Ex fundament at location of working in Germany,
non-binding time of delivery: at short notice, after payment for 100%
Payment condition: 80% advanced for contract placing; 20% before loading
offer validity: Subject to sale and mistakes

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Previous