TORNI AUTOMATICI

machine type
brand
year
ID

multi spindle automatic lathes
Schütte / Index
0

we are looking for multi spindle automatic lathes

Schütte SF26 with CNC cross slide

Index MS22

Index MS32

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte / Index
0

We are searching for multi spindle automatic lathes

Schütte SF26S

Index G200

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte SF13/SF20/SE25
0

we are looking short term for multi spindle automatic lathes

Schütte SF13

Schütte SF20

Schütte SE25

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte SG18 / AG20
0

we are looking for multi spindle automatic lathes

Schütte SG18

Schütte AG20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte / INDEX
0

we are looking for multi spindle automatic lathes

Schütte AG20 as double-4, 2x thread cutting, 2x CNC cross slide, optional spindle stop

Schütte AF32 as double-4, 2x thread cutting, 2x CNC cross slide, optional spindle stop

INDEX/Schütte multi-spindle machine D40mm (SW32) with CNC backworking

INDEX G220 main spindle passage 90mm including tool changer

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte AF32S Dnt
0

we are looking for multi spindle automatic lathes

Schütte AF32S Dnt

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathe
Schütte SC9-32
0

we are looking short term for multi spindle automatic lathes

Schütte SC9-32

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathe
Schütte SF51
0

we are looking for multi spindle automatic lathes

Schütte SF51

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

cam controlled multispindle automatic lathe
Tornos
0

we are looking for multi spindle automatic lathes:

Tornos SAS 16.6

Tornos SAS 16 DC

Tornos Deco 20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathes
several
0

we are looking for multi spindle automatic lathes

Schütte SF 51
Schütte SF 51 S-Dnt
Schütte SF 32 S-Dnt
Schütte SF 26 S-Dnt
Schütte AG 20
AF 32
AF 32 S-Dnt
A 36 PC
und
Tornos SAS 16

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathes
Schütte, Index, Citizen, Star
0

We are currently looking for multispindle automatic lathes

Index MS 32
Index MS 42C
Index MS 40


and CNC-swiss-type automatic lathes

Citizen
Star

and Schütte machines


If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multispindle automatic lathes
Schütte
0

we are looking for multi spindle automatic lathes

Schütte SC9-32
Schütte SC9-46
Schütte SF 51 PC
Schütte A 36 PC
Schütte S 36 PC
Schütte SF 51 S-Dnt
Schütte AG 20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

We are always searching for Schutte machines
Schütte

multispindle automatics like: SG18, AG20, SF26S Dnt, SF32S Dnt, SF51S Dnt,
AF32S Dnt, SFH 160S Dnt, AFH 130S Dnt, A36PC, S36PC, S51PC, SC6-32, SC7-32, SC9-32


tool grinders like: Schutte WU305 5-axis CNC grinder

machine type
brand
year
ID

multispindle automatic lathe
Schutte
0

we are looking for multi spindle automatic lathes:

Schütte SF32
Schütte AG20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Schütte AFH130
0

we are looking for multi spindle automatic lathes

Schütte AFH130

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Index MS25M
0

we are looking short term for multi spindle automatic lathes

Index MS25M

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathes
Index MS25
0

we are looking short term for multi spindle automatic lathes

Index MS25

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

multi spindle automatic lathe
Gildemeister GM 16-6
0

We are looking for turning lathes

Gildemeister GM 16-6

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

cam controlled automatic lathes
Schütte SF51
1988
61810

Article: cam-controlled multi-spindle automatic lathe with CNC-pickup
Manufacturer: Schütte
Type: SF51
Yob: 1988
six main spindles
for bars up to D=51mm
CNC-pickup in position 6 with rear CNC-machining;
electronic cam control Balluff;
independent feed position 4;
chip conveyor: magnetic belt;
oil/stee-running;
additional coolant pump with double filter (magnetic cartridge filter).
The machine tools shown and not listed are not part of the scope of delivery.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam controlled automatic lathes
Schütte AF51
1987
61829

Article: multi spindle automatic lathe
Manufacturer: Schütte
Type: AF51
Yob: 1987
eight main spindles
max. bar diameter D=51mm
control SIEMENS SIMATIC S5
pick up in pos. 7, for rear machining
thread cutting drive
independent feed in positions 2/3
electronical trip dog control “Balluff”
clear text display Wöhrle
coolant pump
magnetic cartridge filter
oil running
incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)
Painting in light blue and light grey
The configuration of tooling will be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Cam controlled multi spindle automatic lathe
Schütte AF32DNT
1993
61894

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: AF32 Dnt
Yob: 1993
eight-spindle automatic lathe
eight main spindles
for bars up to D=32mm
Modernized control: Siemens Sinumerik
Motors: renewed modern motors suitable for modernized control system
Electronic trip dog control: Balluff
CNC cross slide position 5 cross
CNC cross slide position 6 cross
Preparation for gripper in position 8 (gripper optional)
Independent feeds
Thread cutting couplings
integrated bar loader: Pietro CUCCHI; type: rack type magazine
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
Schütte S51PC
2008
61884

Article: CNC-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: S51 PC
Yob: 2008
Six-spindle automatic lathe with 6 main spindles
max. nominal diameter D=51mm
hirth-coupled spindle drum,
Control: Software SICS 2000 / Windows 2000 / Beckhoff Twincat

Position I: cross slide X-I; longitudinal slide Z-I
Position II: compound slide cross XZ-II; longitudinal slide Z-II
Position III: compound slide cross XZ-III; longitudinal slide Z-III
Position IV: compound slide cross XZ-IV; compound slide longitudinal ZX-IV
Position V: cross slide X-V; compound slide longitudinal ZX-V
Position VI: cross slide X-VI; pick up for rear machining; second cross slide XX-VI

Coolant tank with hinged belt chip conveyor;
Coolant pump with two pressure connections: q= 180 l/min, p1 bar; q=70 l/min, p=7 bar;
Workpiece collecting device with belt conveyor (low-damage workpiece removal);
Sorting device for initial and offcuts;
IEMCA back loader PRA52F/42 (Profibus);
Preparation: Teleservice; oil mist filter; second variable speed

The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

cam controlled multispindle automatic lathe
Schütte AFH 130 with CNC
1990
61636

Manufacturer: Schütte
Machine type: cam controlled multispindle automatic lathe
Type: AFH130 with CNC
Yob: 1990
number of main spindles: 8
Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading,
Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures
option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
Schütte A36PC
2013
61896

Article: CNC-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: A36PC
Yob: 2013
Eight-spindle automatic lathe with 8 main spindles
max. nominal diameter D=36mm
spur-toothed spindle drum
control: Windows / Beckhoff TWIN-Cat

Extract from order confirmation for first delivery, deviation from current status if necessary:
1x preparation for additional spindle speed
1x IEMCA-PRA 52F/35 rear loader, Yob: 2007
1x rest piece sorting device
1x workpiece collecting device with belt conveyor
1x Knoll coolant HD system SF2000/Turbo-3
1x hinged belt chip conveyor
1x Kraft & Bauer fire extinguishing system
1x pressure relief flaps
1x oil mist extraction system
1x additional tubes for bar guide for bar diameter 10 - 28mm
Position I longitudinal: Drive spindle with HSK with internal coolant supply
Position I transverse: CNC compound slide, transverse
Position II longitudinal: CNC compound slide, for longitudinal slide
Position II transverse: CNC compound slide, transverse
Position III longitudinal: Drive spindle with HSK with internal coolant supply
Position III transverse: Preparation for pneumatic and electric stamping device
Position IV: Additional spindle speed
Position IV longitudinal: Preparation for CNC compound slide, longitudinal, electric and hydraulic
Position IV transverse: Electrical preparation for cross drilling device
Position V: Additional spindle speed
Position V longitudinal: Preparation for CNC compound slide, longitudinal, electric and hydraulic
Position V transverse: CNC compound slide, transverse; electrical preparation for transverse drilling device
Position VI longitudinal: preparation for pneumatic and electric marking device
Position VI transverse: CNC compound slide, transverse
Position VII longitudinal: pick up for rear-side machining, drive for variable speed; electrical preparation for rear-side machining with driven tool
3x variable tool drive [positions A, B, D]
1x length query on cover strip by Detector

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Cam controlled multi spindle automatic lathe
Schütte SF51 DNT
1987
61868

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF51 DNT
Yob: 1987
Six-spindle automatic lathe with 6 main spindles
max. nominal diameter D=51mm
electronic cam control Balluff
gripper in position 6 for backworking, sorting chute
independent longitudinal feed layer 5
screw chip conveyor
Tapping couplings
Interface for: Bar feeder IEMCA PRA
Bar feeder IEMCA PRA40/33/F
Scope of delivery without the blue chip conveyor
The tooling will differ from the scope of delivery!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Cam controlled multi spindle automatic lathe
Schütte AF32 S DNT
1994
61871

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: AF32 S DNT
Yob: 1994
Eight-spindle automatic lathe with 8 main spindles
max. nominal diameter D=32mm
control: Siemens SIMATIC S7
electronic cam control Balluff
gripper in position 8 for backworking
CNC cross slide position 6
CNC cross slide position 7
Workpiece belt
Coolant cooling Schimpke
Chip conveyor with magnetic separator
Tapping couplings
The tooling shown may differ from the scope of delivery!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

We are always searching for INDEX machines
INDEX

multispindle automatics like : MS22C, MS32C, MS32P, MS32G, MS40C, MS42C, MS52C, MS52G
cnc one spindle turning machines like: ABC,...
turn-mill centers like: G200, G300,...

machine type
brand
year
ID

multi spindle automatic lathe
Index MS22
0

we are looking for multi spindle automatic lathes

Index MS22

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

turn-mill centres
Index
0

we are searching for turn-mill centres, not older than 10 years:

Index C200

Index G200

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

We are always searching for Tornos machines
Tornos

multispindle automatics like : SAS16.6, MultiDeco 20/6b, MultiDeco 20/8b, MultiDeco 32/6i, MultiAlpha 6x32, MultiAlpha 8x26, MultiSigma 8x24


cnc one spindle turning machines like: Deco 20a,...

machine type
brand
year
ID

multi spindle automatic lathes
Tornos BS20
0

we are looking for multi spindle automatic lathes

Tornos BS20

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
Tornos MultiSwiss 8x26
2016
61861

Article: CNC-controlled multi-spindle automatic lathe
Manufacturer: Tornos
Type: MultiSwiss 8x26
Yob: 2016
full cross slide configuration,
counter spindle,
part-pre-drawing device,
2 x driven tools,
3 x Y-axis,
1 rigid backworking,
1 x driven backworking,
2x 80 bar high pressure pumps
optional: setting robot, manufacturer HandlingTech.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
Tornos MultiSwiss 8x26
2019
61862

Article: CNC-controlled multi-spindle automatic lathe
Manufacturer: Tornos
Type: MultiSwiss 8x26
Yob: 2019
full cross slide configuration,
counter spindle,
part-pre-drawing device,
2 x driven tools,
1 rigid backworking,
1 x driven backworking,
2x 80 bar high pressure pumps
optional: setting robot make HandlingTech.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

We are always searching for GILDEMEISTER machines
Gildemeister

multispindle automatics like GM 20, GM 16, GM 35, GMC 20, GMC 20 ISM linear, GMC 25 ISM linear, GMC 35 ISM linear, GMC 42 ISM linear


swiss types like Sprint 32 linear, Sprint 42 linear, Sprint 20 linear, Sprint 50 linear, Sprint 50-2T, Sprint 50-3T

machine type
brand
year
ID

multi spindle automatic lathes
DMG Multisprint 36
0

We are searching for turning lathes

DMG Multisprint 36 for chuck part machining

If you want to sell your machine, please call us. We gladly submit an offer.

machine type
brand
year
ID

multi spindle automatic lathe
Gildemeister
0

We are looking for turning lathes

Gildemeister GM 16-6

Gildemeister GM 20-6

Gildemeister GM 32-6

Gildemeister GM 35-6

Gildemeister GM 42-6

If you want to sell your machine, please call us or send us an email!

machine type
brand
year
ID

cam-controlled multi-spindle automatic lathe
Gildemeister GM26AC
1995
61837

Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Gildemeister
Type: GM26AC
Yob: 1995
six main spindles
for bars up to D=26mm
pick up in position 6
bar loading magazine IEMCA PRA with Pietro Cucchi PB30
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC-controlled multi-spindle automatic lathe
MORI SAY TMZ 8/67 CNC
2018
61857

Machine type: CNC controlled multi spindle automatic lathe
Manufacturer: MORI SAY
Type: TMZ 8/67 CNC
Yob: 2018

Double four-spindle machine, eight-spindle machine

with spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 collets
equipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of:

indexing speed of the spindles drum with bar feed at station 1
speed and orientation of each of 8 main spindles
speed and position of each of 8 frontal slides
speed and position of each of 7 compound slides
speed and position of the cut-off slide at station 8
for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer.

Machine equipped with the following optional items:

BAR LOADER
automatic bar feeder model PB 60 by CUCCHI BLT for bars L = 3 m, bundle loader, with rotating centering and fork devices, elastic bushings, 2 proportional valves, double bar feeding

CHIP DISPOSAL SYSTEM
removable coolant tank complete with:  Conveyor for long/short chipping material, self-cleaning sieve, magnetic filter. Additional conveyor for transporting chips in the direction perpendicular to the main conveyor

PARTS REMOVAL SYSTEM
air operated chute complete with: Conveyor belt, external parts collection bin

DEVICES FOR BACKWORKING
Pick-up spindle with external clamping, complete with: Counter spindle drive (axis S08), pneumatic ejector, hydraulic collet cleaning system, internal flushing, counter machining slide with CNC control of radial movement (axis X8).

Additional material stop

FRONT SLIDE EQUIPMENT
Quick-change drill holder with interface VDI 30 for collets type ER,
KOMET compact CNC-drive unit for internal machining and internal thread chasing (drive included), Centred tool holder for KOMET compact CNC drive unit

SPECIAL EQUIPMENT
Direct measurement of spindles, tool monitoring system

CROSS SLIDE AND CUTTING-OFF DEVICE
Cutting blade holder, Static flat form turret tool holder VDI 30, Turret tool holder VDI 30, Drilling tool holder VDI 30, Slide for vertical movement (Y-axis full) of cross slide with receptacles for 3 static tool holders, Flat form tool holder VDI 16 X 16 for slide with vertical movement (Y-axis), CNC-controlled rotating tool holder for thread milling and polygon generation (drive included)

HIGH PRESSURE SYSTEMS

LOSMA F5 high pressure cutting oil filtration system complete with: external tank (1000 litres capacity), high pressure pump (18.5 kW, 70 bar, 100 litres/min), filling pump, self-cleaning filter (25 micron), control panel for the high pressure system,

AEROSOLS ABATING and FIRE PREVENTION SYSTEMS

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

programme-controlled automatic lathe
Traub TF60 / 140
1978
61869

Article: Programme-controlled automatic lathe
Manufacturer: Traub
Type: TF60 / 140
Yob: 1978

Bar automat

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

Hand-, Cycle- and CNC-Lathe
DMT Kern CD480
2000
61899

Article: Hand-, Cycle- and CNC-Lathe
Manufacturer: DMT Kern
Type: CD480
Control: Haidenhain
Year of construction: 2000
Machine has processed plastic
Lead screw and/or lock case must be overhauled
Sale without tool holder!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC Lathe
EMCO Turn25
2019
61900

Article: CNC lathe
Manufacturer: Emco
Type: TURN E25
Control: SIEMENS SINUMERIC
Year of construction: 2019
Machine has processed plastic
Turret fixation needs to be overhauled
Sale without tool holder, without oil mist extraction and without loading magazine!

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC Lathe
Spinner BK-CNC
0
61898

Article: CNC Lathe
Manufacturer: Spinner
Type: BK-CNC
Control: SIEMENS
Tool turret
Bar guide
Machine has processed plastic
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

machine type
brand
year
ID

CNC Lathe
Spinner SB-CNC
0
61897

Article: CNC Lathe
Manufacturer: Spinner
Type: SB-CNC
Control: SIEMENS
Machine has processed plastic
The scope of delivery regarding the tooling equipment could be different like pictures.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Previous