ACCESSORIES
Our range of products includes equipment and machine tooling like cams, tool holders, etc. for machines of the company Schütte.
Being a distribution partner of HAINBUCH GmbH, we offer the complete product spectrum of the manufacturer of clamping devices HAINBUCH as new products for turning and milling applications.
Additionally, we hold a large stock of reconditioned chucks, chuck heads, and feed collets. Just contact us for further information!
Article: CNC compound slides
Manufacturer: R-Tech
Type: CX35 / CX70
CNC compound slides CX35 and CX70 for retrofitting
It does not always have to be an expensive full CNC multi-spindle automatic lathe.
Adapt your existing cam-controlled multi-spindle automatic lathe to current and future challenges. Optimize your production on cam-controlled multi-spindle lathes with retrofittable CNC cross-slides.
Compatible with: Gildemeister, Schütte, Tornos, MORY-SAY, Wickman
The inexpensive and reliable production of the workpiece on their existing cam-controlled multi-spindle automatic lathes often fails:
- complex contours inside and outside
- Machining of materials that are difficult to machine, such as stainless steels, etc. using the parting and grooving process
- required surface qualities
- long chip materials (no defined chip breaking)
- Changeover times with assembly and disassembly of special equipment too long
- Accuracy requirements
The CNC cross slide offers numerous machining possibilities, which are easy to realize thanks to the Fanuc CNC.
Usually the assembly takes only 3 days without any other modification of your machine.
More information is available on request!
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
mtk xz: for turning complex contures
With our cnc compound slides (xz) is it possible to equip conventional machines for the future.
Optimising of multi-spindle automatic lathes - Revalue your maschine
We advice you gladly !
Videolink: http://youtu.be/yxPRu_ojFSk
mtk xxz: for cnc rear machining
With our cnc rear machining attachment is it possible to machine the second workpiece side.
Optimising of multi-spindle automatic lathes - Revalue your maschine
For example: save the second clamping
We advice you gladly !
Videolink: http://youtu.be/yxPRu_ojFSk
Article: Internal chasing units
Manufacturer: Schütte
Type: GF120N
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Chaser
Manufacturer: Schütte
Type: AE77N
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: excenter drilling attachment
Manufacturer: Schütte
excenter drilling attachment for Schütte S51PC,
max. adjustable pitch diameter: 24mm, max. speed: 6000 r/min
with adaptor HSK32 to ER16-collets
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Polygon turning unit
Manufacturer: Saco
Type: 15.22.001-Nr.3
polygon turning unit for Schutte AG20, used
1 polygon turning unit type Saco SC 15.22.001-Nr.3
1 cardan shaft type Saco SC 15.52.188.00
1 gear box SC 15.22.001-Nr. 3
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: threading spindle
Manufacturer: Schütte
Type: 31AG; B31TG
threading spindle 31AG with adaptor B31TG for Schütte AG20
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: drive spindle
Manufacturer: Schütte
Type: C7823-G1AZ-Nr.4
drive spindle for example for threading spindle for Schütte AG20
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: threading spindle
Manufacturer: Saco
Type: SC05.68.001-04
Threading spindle for Schütte AG20
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Recessing slide unit
Manufacturer: Schütte
Type: DD47N; UF47N
recessing slide unit DD47N with UF47N for Schutte AF51
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Recessing slide unit
Manufacturer: Schütte
Type: DD47N; UF47N
recessing slide unit DD47N with UF47N for Schutte AF51
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: End-milling-unit
Manufacturer: Schütte
Type: 66BF
for Schütte SF20/26, used
2 pieces available
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: tangential thread rolling heads
Manufacturer: Fette
T-type, different sizes available
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: accessories for tangential thread rolling heads
Manufacturer: Fette
accessories for tangential thread rolling heads T-type, e.g. holder, thread rolls
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: axial thread rolling heads
Manufacturer: Fette
F-type, different sizes available
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: tangential thread rolling heads
Manufacturer: Wagner
B-type, different sizes available
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: SWS-toolholders
Manufacturer: Schütte
Type: C88EF80S1
for Schutte multispindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: SWS-toolholders
Manufacturer: Schütte
Type: C88HDD1S1-1A
for Schutte multispindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Mounting shaft
Manufacturer: Röhm
Type: 485852 0717
1 piece of mounting shaft for Schütte AG20 for example, with HSK32C-interface,
d=30x162 with coolant connector (bore) axial ->coupling part from Schütte is needed,
slightly used
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: cam
Manufacturer: Schütte
For Schütte multi spindle automatic lathes F- and G-Type of different sizes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: gears
Manufacturer: Schütte
For Schütte multi spindle automatic lathes F- and G-Type of different sizes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Chuck-set
Manufacturer: Hainbuch
Type: SP.0218.0490.00; SW.SP.1118.0007.00; SP.1116.0065.00
Chuck-set Hainbuch consisting of:
1x Chuck Spanntop-Kombi Gr.65 Axzug IP140 SP.0218.0490.00 for Schütte SFH160
2x Adaptor SW.SP.1118.0007.00 for clamping heads SK65BZ
1x Adaptor SP.1116.0065.00 for clamping heads SK65BZ
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: hydraulic chuck
Manufacturer: ERICKSON Kennametal
Type: HSK32 CHC 12070M E0 NG13
For example for use with Schutte multi-spindle automatic lathes SCX
Schutte SC7-32, Schutte SC7-46, Schutte SC9-32, Schutte SC9-46, Schutte AC9-36, Schutte AC10-36
Can also be used with other machine types
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: clamping collets
Manufacturer: Different
For multi spindle automatic lathes, used and new
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Clamping tools
Manufacturer: Hainbuch
Type: SK9210BZ; SG9210BZ; RS80
6x clamping head Hainbuch SK9210BZ, Ø74,00mm
6x basic body for clamping head SG9210BZ
6x inner collet RS80, Ø74,00mm
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Clamping heads
Manufacturer: Hainbuch
Type: SK-SF100BZ
6x Hainbuch SK-SF100BZ, Ø48,00mm, new
for use at Schütte SF100
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: clamping head
Manufacturer: Different
For multi spindle automatic lathes, used and new
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: pick-off collets
Manufacturer: Different
For multi spindle automatic lathes, used and new
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: feed finger
Manufacturer: Different
Conventional feed finger and collets of RS-system
For multi spindle automatic lathes, used and new
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
We are sales partner of Hainbuch-Workholding Technologie.
We can offer new clamping tools from "Hainbuch" and also offer used clamping tools from different brands.
We are sales partner of Schlenker clamping tools.
We gladly offer new clamping tools from "Schlenker" - made in Germany.
www.schlenker-spannwerkzeuge.de