we are looking for eroding machines

If you want to sell your machine, please call us or send us an email!

We are searching for vertical eroding machines by order of a customer

- not older than 9 years
- working area L 400 x W 300 x H 250
- with electrode changer

If you want to sell your machine, please call us or send us an email!

We are searching for starting-hole eroding machines by order of a customer

- not older than 9 years

If you want to sell your machine, please call us or send us an email!

we are looking short term for a hinged belt chip conveyor for Schütte SF32 (with grey cast iron bed)

If you want to sell your machine, please call us or send us an email!

Eroding machine, second-hand
year of manufacturing: 1989

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Small parts - cleaning system BOUS "CeBeCo" SECURUS "D" size 2 "S", used
from workshop, hardly any operating hours, 1A-TOP-CONDITION
Usable dimensions: approx. 800 mm diameter
Useful height: approx. 450 mm
Operating weight: max. 200 kg with evenly distributed load
Nozzles: flat jet
Pump: approx. 3 kW
2x heating: approx. 2x 6 kW
Thermostat: digital
Insulation: Terodem heat insulation
Detergent filling capacity: approx. 200 l
Power requirement for fan: approx. 0.25 kW
Power requirement for drive: approx. 0.12 kW
Power requirement for emptying pump: approx. 0.6 kW
Voltage: 230/400 V, 50 Hz PE/N
Control voltage: 24 V
Loading height: approx. 900 mm
Labelling: German
1. VAPOUR EXTRACTION
The unit is equipped with a vapour extractor, consisting of an electric low-pressure fan with intake connection. The scope of delivery ends at the outlet opening of the fan. From there an exhaust air line with condensation drain must be connected by  the customer. The fan is designed for 7 m line and 2 pieces of elbow.
2. ADJUSTMENT OF THE NOZZLE SYSTEM
the nozzles are partly supplied in a manually adjustable version (ball head) and two additional vertical nozzle strings are installed.
3. EMPTYING PUMP
for the most extensive emptying - operation in the control panel.
4. 2. COARSE FILTER BASKET
A second coarse filter basket is supplied.
5. LARGE ADDITIONAL CLEANING FLAP (V2A)
incl. stainless steel screen
incl. EPDM seal
6. HARDING PLUG
for the centrifugal pump MTR 15.
This plug is installed to enable faster dismantling of the submersible pump for cleaning purposes.
Without connection cable
The machine could be visited under power.

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Hacksaw, second-hand
hydraulic lowering
mitre cutting device
integrated lubrication and coolant pump (hydraulics defective)

Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com