APARATO
Article: CNC compound slides
Manufacturer: R-Tech
Type: CX35 / CX70
CNC compound slides CX35 and CX70 for retrofitting
It does not always have to be an expensive full CNC multi-spindle automatic lathe.
Adapt your existing cam-controlled multi-spindle automatic lathe to current and future challenges. Optimize your production on cam-controlled multi-spindle lathes with retrofittable CNC cross-slides.
Compatible with: Gildemeister, Schütte, Tornos, MORY-SAY, Wickman
The inexpensive and reliable production of the workpiece on their existing cam-controlled multi-spindle automatic lathes often fails:
- complex contours inside and outside
- Machining of materials that are difficult to machine, such as stainless steels, etc. using the parting and grooving process
- required surface qualities
- long chip materials (no defined chip breaking)
- Changeover times with assembly and disassembly of special equipment too long
- Accuracy requirements
The CNC cross slide offers numerous machining possibilities, which are easy to realize thanks to the Fanuc CNC.
Usually the assembly takes only 3 days without any other modification of your machine.
More information is available on request!
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
mtk xz: for turning complex contures
With our cnc compound slides (xz) is it possible to equip conventional machines for the future.
Optimising of multi-spindle automatic lathes - Revalue your maschine
We advice you gladly !
Videolink: http://youtu.be/yxPRu_ojFSk
mtk xxz: for cnc rear machining
With our cnc rear machining attachment is it possible to machine the second workpiece side.
Optimising of multi-spindle automatic lathes - Revalue your maschine
For example: save the second clamping
We advice you gladly !
Videolink: http://youtu.be/yxPRu_ojFSk
Article: Internal chasing units
Manufacturer: Schütte
Type: GF120N
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Chaser
Manufacturer: Schütte
Type: AE7N
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: excenter drilling attachment
Manufacturer: Schütte
excenter drilling attachment for Schütte S51PC,
max. adjustable pitch diameter: 24mm, max. speed: 6000 r/min
with adaptor HSK32 to ER16-collets
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Polygon turning unit
Manufacturer: Saco
Type: 15.22.001-Nr.3
polygon turning unit for Schutte AG20, used
1 polygon turning unit type Saco SC 15.22.001-Nr.3
1 cardan shaft type Saco SC 15.52.188.00
1 gear box SC 15.22.001-Nr. 3
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: threading spindle
Manufacturer: Schütte
Type: 31AG; B31TG
threading spindle 31AG with adaptor B31TG for Schütte AG20
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: drive spindle
Manufacturer: Schütte
Type: C7823-G1AZ-Nr.4
drive spindle for example for threading spindle for Schütte AG20
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: threading spindle
Manufacturer: Saco
Type: SC05.68.001-04
Threading spindle for Schütte AG20
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Recessing slide unit
Manufacturer: Schütte
Type: DD47N; UF47N
recessing slide unit DD47N with UF47N for Schutte AF51
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Recessing slide unit
Manufacturer: Schütte
Type: DD47N; UF47N
recessing slide unit DD47N with UF47N for Schutte AF51
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: End-milling-unit
Manufacturer: Schütte
Type: 66BF
for Schütte SF20/26, used
2 pieces available
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Schutte slot milling attachment
Manufacturer: Schütte
Machine type: SF32
Schutte slot milling attachment for Schutte multi spindle automatic lathe SF32
with many spare parts
with a second incomplete slot milling attachment for spare parts removal
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: tangential thread rolling heads
Manufacturer: Fette
T-type, different sizes available
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: accessories for tangential thread rolling heads
Manufacturer: Fette
accessories for tangential thread rolling heads T-type, e.g. holder, thread rolls
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: axial thread rolling heads
Manufacturer: Fette
F-type, different sizes available
for multi spindle automatic lathes
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com