TORNI AUTOMATICI
Article: CNC compound slides
Manufacturer: R-Tech
Type: CX35 / CX70
CNC compound slides CX35 and CX70 for retrofitting
It does not always have to be an expensive full CNC multi-spindle automatic lathe.
Adapt your existing cam-controlled multi-spindle automatic lathe to current and future challenges. Optimize your production on cam-controlled multi-spindle lathes with retrofittable CNC cross-slides.
Compatible with: Gildemeister, Schütte, Tornos, MORY-SAY, Wickman
The inexpensive and reliable production of the workpiece on their existing cam-controlled multi-spindle automatic lathes often fails:
- complex contours inside and outside
- Machining of materials that are difficult to machine, such as stainless steels, etc. using the parting and grooving process
- required surface qualities
- long chip materials (no defined chip breaking)
- Changeover times with assembly and disassembly of special equipment too long
- Accuracy requirements
The CNC cross slide offers numerous machining possibilities, which are easy to realize thanks to the Fanuc CNC.
Usually the assembly takes only 3 days without any other modification of your machine.
More information is available on request!
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
we are looking for multi spindle automatic lathes
Schütte AG20
Index MS32
Index MS40
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte SF42
Schütte SF51
Schütte S36PC
pickoff for Schütte SF13
Tornos SAS 16
If you want to sell your machine, please call us or send us an email!
we are looking short term for multi spindle automatic lathes
Schütte SF13
Schütte SF20
Schütte SE25
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte SG18
Schütte AG20
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte AG20 as double-4, 2x thread cutting, 2x CNC cross slide, optional spindle stop
Schütte AF32 as double-4, 2x thread cutting, 2x CNC cross slide, optional spindle stop
INDEX/Schütte multi-spindle machine D40mm (SW32) with CNC backworking
INDEX G220 main spindle passage 90mm including tool changer
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte AF32S Dnt
If you want to sell your machine, please call us or send us an email!
we are looking short term for multi spindle automatic lathes
Schütte SC7-32
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte SF51
If you want to sell your machine, please call us or send us an email!
we are looking for turning lathes:
Index C 200
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes:
Tornos SAS 16.6
Tornos SAS 16 DC
Tornos Deco 20
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte SF 51
Schütte SF 51 S-Dnt
Schütte SF 32 S-Dnt
Schütte SF 26 S-Dnt
Schütte AG 20
AF 32
AF 32 S-Dnt
A 36 PC
und
Tornos SAS 16
If you want to sell your machine, please call us or send us an email!
We are currently looking for multispindle automatic lathes
Index MS 32
Index MS 42C
Index MS 40
and CNC-swiss-type automatic lathes
Citizen
Star
and Schütte machines
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte SC9-32
Schütte SC9-46
Schütte SF 51 PC
Schütte A 36 PC
Schütte S 36 PC
Schütte SF 51 S-Dnt
Schütte AG 20
If you want to sell your machine, please call us or send us an email!
multispindle automatics like: SG18, AG20, SF26S Dnt, SF32S Dnt, SF51S Dnt,
AF32S Dnt, SFH 160S Dnt, AFH 130S Dnt, A36PC, S36PC, S51PC, SC6-32, SC7-32, SC9-32
tool grinders like: Schutte WU305 5-axis CNC grinder
we are looking for multi spindle automatic lathes:
Schütte SF32
Schütte AG20
If you want to sell your machine, please call us or send us an email!
we are looking for multi spindle automatic lathes
Schütte AFH130
If you want to sell your machine, please call us or send us an email!
we are looking short term for multi spindle automatic lathes
Index MS25M
If you want to sell your machine, please call us or send us an email!
we are looking short term for multi spindle automatic lathes
Index MS25
If you want to sell your machine, please call us or send us an email!
We are looking for turning lathes
Gildemeister GM 16-6
If you want to sell your machine, please call us or send us an email!
Article: cam-controlled multi-spindle automatic lathe with CNC-pickup
Manufacturer: Schütte
Type: SF51
Yob: 1988
six main spindles
for bars up to D=51mm
CNC-pickup in position 6 with rear CNC-machining;
electronic cam control Balluff;
independent feed position 4;
chip conveyor: magnetic belt;
oil/stee-running;
additional coolant pump with double filter (magnetic cartridge filter).
The machine tools shown and not listed are not part of the scope of delivery.
The scope of delivery regarding the tooling equipment could be different like pictures.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Manufacturer: Schütte
Machine type: cam controlled multispindle automatic lathe
Type: SF20
Yob: 1990
diameter range: max. 20
number of main spindles: 6
control: Siemens S5 PLC, electronical trip dog control type „Balluff“, gear box for thread milling (2 pieces), pick up for rear machining in pos. 6, work piece sorting shute, coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures
partly revised inclusive new spindle bearings of the main spindles
interface for IEMCA bar loader
option: barloader: IEMCA-PRA 40/33 P -rack type-
Video-Link: https://youtu.be/7MueLSQH3AM
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Manufacturer: Schütte
Machine type: cam controlled multispindle automatic lathe
Type: AFH130 with CNC
Yob: 1990
number of main spindles: 8
Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading,
Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures
option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: cam-controlled multi-spindle automatic lathe
Manufacturer: Schütte
Type: SF81
Yob: 1987
six main spindles,
for bars up to D=81mm
gripper (currently not mounted, enclosed)
bar guide for approx. 4,000 mm bars
electronic trip dog control Balluff
threading clutches
coolant pump, Additional coolant pump
various accessories, such as cams, change gears, tool holders, clamping and feed collets, etc.
video link: https://youtu.be/jSLRdrodmlg
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
multispindle automatics like : MS22C, MS32C, MS32P, MS32G, MS40C, MS42C, MS52C, MS52G
cnc one spindle turning machines like: ABC,...
turn-mill centers like: G200, G300,...
we are looking for multi spindle automatic lathes
Index MS22
If you want to sell your machine, please call us or send us an email!
multispindle automatics like : SAS16.6, MultiDeco 20/6b, MultiDeco 20/8b, MultiDeco 32/6i, MultiAlpha 6x32, MultiAlpha 8x26, MultiSigma 8x24
cnc one spindle turning machines like: Deco 20a,...
we are looking for multi spindle automatic lathes
Tornos BS20
If you want to sell your machine, please call us or send us an email!
multispindle automatics like GM 20, GM 16, GM 35, GMC 20, GMC 20 ISM linear, GMC 25 ISM linear, GMC 35 ISM linear, GMC 42 ISM linear
swiss types like Sprint 32 linear, Sprint 42 linear, Sprint 20 linear, Sprint 50 linear, Sprint 50-2T, Sprint 50-3T
We are searching for turning lathes
DMG Multisprint 36 for chuck part machining
If you want to sell your machine, please call us. We gladly submit an offer.
We are looking for turning lathes
Gildemeister GM 16-6
Gildemeister GM 20-6
Gildemeister GM 32-6
Gildemeister GM 35-6
Gildemeister GM 42-6
If you want to sell your machine, please call us or send us an email!
Article: Lathe
Manufacturer: GDW
Type: LZ280VS
Yob: 2010
pressure collet system with max. nominal passage D=42mm
extensive accessories, such as 3-jaw chuck etc.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
High-precision CNC lathe with linear cross slide, second-hand.
Machine was only used for finishing, so only did light machining work!
Control: Siemens Sinumerik 840Dsl
Main spindle: maintenance-free motor spindle
Bar capacity. D26mm
Chip processing tank with coolant pump: 30l/min at 5bar
Loading and unloading device type IB
Additional gripping system for positional depositing of workpieces on unloading belt
Linear tool system B1 me tool block with 5 bores
Adjusting microscope 16-fold magnification
Coolant supply through clamping cylinder of spindle
Speed increase of the motor spindle D26mm to 8.000rpm
Nordmann tool monitoring
Profibus-Master interface
Milling/drilling unit
Hinged belt conveyor Knoll
Compact coolant unit Knoll with centrifugal pumps
Network interface for teleservice
A total of 4 similar machines are available - package sale possible
Video-Link: https://youtu.be/3m59cYqnEAI
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Benzinger GOFuture B1 (internal Benzinger 1.2), yob 2015, our ID #61801
High-precision CNC lathe with linear cross slide, second-hand.
Machine was only used for finishing, so only did light machining work!
Control: Siemens Sinumerik 840Dsl
Main spindle: maintenance-free motor spindle
Bar capacity: D26mm
Chip processing tank with coolant pump: 30l/min at 5bar
Loading and unloading device type IB
Additional gripping system for positional depositing of workpieces on unloading belt
Linear tool system B1 me tool block with 3 bores
Spindle attachment for collet chucks 363E (clamping D 1 to 22mm, max. passage 18mm)
C-axis main spindle incl. transaxis function
Adjusting microscope B1 and B2 16x magnification
Coolant supply through clamping cylinder of the spindle
Speed increase of motor spindle D26mm to 8.000rpm
Nordmann tool monitoring
Profibus-Master interface
Milling/drilling unit
Hinged belt conveyor Knoll
Compact coolant unit Knoll with centrifugal pumps
MBE interface
Small fire extinguishing system Kraft and Bauer
Network interface for CB-remote
A total of 4 similar machines are available - package sale possible
Video-Link: https://youtu.be/mWICc9SdeL0
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
High-precision CNC lathe with linear cross slide, second-hand.
Machine was only used for finishing, so only did light machining work!
Control: Siemens Sinumerik 840Dsl
Main spindle: maintenance-free motor spindle
Bar capacity. D26mm
Chip processing tank with coolant pump: 30l/min at 5bar
Loading and unloading device type IB
Linear tool system B1 me tool block with 3 bores
C-axis main spindle incl. transaxis function
Adjusting microscope B1 and B2 16x magnification
Coolant supply through clamping cylinder of the spindle
Speed increase of motor spindle D26mm to 8.000rpm
Nordmann tool monitoring
Profibus-Master interface
Milling/drilling unit
Hinged belt conveyor Knoll
Compact coolant unit Knoll with centrifugal pumps
MBE interface
Small fire extinguishing system Kraft and Bauer
Network interface for CB-remote
A total of 4 similar machines are available - package sale possible
Video-Link: https://youtu.be/r7slQfb1exM
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com