multispindle automatics like: SG18, AG20, SF26S Dnt, SF32S Dnt, SF51S Dnt,
AF32S Dnt, SFH 160S Dnt, AFH 130S Dnt, A36PC, S36PC, S51PC, SC6-32, SC7-32, SC9-32

tool grinders like: Schutte WU305 5-axis CNC grinder

6 main spindles
pick up for rear machining, electronic trip dog control,
threading clutches, active air climated electronical cabinet,
interface for bar loader IEMCA PRA enclosed [optional: bar loader IEMCA PRA40/33/P]
tooling: could be different like pictures

6 main spindles,
control Siemens S5 PLC, electronic trip dog control Type “Balluff”,
stepless adjustable spindle Drive “Dnt”, pick up for rear machining
threading clutches, stock stand and reel,
interface for bar loader IEMCA PRA enclosed,
bar loader IEMCA PRA 40/42/F (bundle type),
tooling: could be different like pictures

The machine is cleaned, revised and new colored in scheme: grey / blue
tooling: could be different like pictures

videolink: https://youtu.be/2tdQMErB_eE

6 main spindles
stepless adjustable Dnt-drive, Hirth coupled drum
pick up in pos. 6
independent feed in pos. 1, 2 ,4 ,5
stock stand and reel,
coolant box with hinge chip conveyor and coolant pump
cleaned, partly revised and new colored in color scheme grey/blue
tooling: could be different like pictures

video link: https://youtu.be/eH-KbmmfGA4

6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff“, gear box for thread milling (2 pieces), pick up for rear machining in pos. 6, work piece sorting shute, coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures
partly revised inclusive new spindle bearings of the main spindles
interface for IEMCA bar loader
option: barloader: IEMCA-PRA 40/33 P -rack type-

Video-Link: https://youtu.be/7MueLSQH3AM

8 main spindles, pick up, threading clutches, frontal milling unit, spindle stop and fixing unit position 5

8 main spindles, control Siemens S5 PLC, pick up for rear machining, threading clutches, 2x cross drilling units, frontal milling unit, spindle stop and fixing unit position 2, 3, 4, 5 (double fixing in pos. 2), recessing unit

6 main spindles with passage max. rated diameter 67mm, prepared for pick up for rear machining in pos. 6 (pick up optional), threading clutches, stock stand and reel, coolant pump

tooling: could be different like pictures

[optional: cleaning and revising].
video link: https://youtu.be/Cp03hJLAoaI

control siemens 840C, 6-spindle screw machine, six main spindles for bar diameter max. D 51mm, counter spindle for rear machining, threading clutches/drive currently used for counter spindle stopping, 1 CNC compound slide in Position 4, coolant high pressure pump, coolant box with pump and chip conveyor, fire extinguishing unit Kraft & Bauer, Nordmann tool monitoring system, work piece belt
preparation for IEMCA-PRA-bar loader (bar loader not in scope of delivery)
pictures of alike machine
pictured tooling could be different to scope of delivery

Please, contact us for getting more informations and pictures on mail(@)tar-mc.com or www.tar-mc.com

-sold-
6 main spindles
pick-off attachment for pos. 6
coolant container with integrated chip conveyor
stock stand and reel; oil mist filter, low running hours, a lot of new parts, revised

video link: https://youtu.be/E0r_gH3nmyA

6 main spindles with max. outlet bar D 26mm, stepless adjustable spindle speed, electronical trip doc control type Balluff, pick up for rear machining, threading clutches/drive, interface preparation for bar loader type IEMCA PRA [bar loader not in scope of delivery], coolant pump, optional: Oil/chip box with hinge chip belt

cleaned, refreshed and new colored in color scheme grey/blue

tooling: could be different like pictures

video link: https://youtu.be/XJ-3dG9VESo

Please, contact us for getting more informations and pictures on mail(@)tar-mc.com or www.tar-mc.com

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading,
Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures
option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

6 main spindles, electronic trip dog control “Balluff”, PLC Siemens S5, pick up for rear machining in pos. 6, independent feed in positions: 1, 2, 4, 5, stock stand and reel, (interface for bar loader IEMCA PRA enclosed), coolant pump, fire extinguishing unit, tooling: could be different like pictures

-sold-

6 main spindles, pick up for rear machining in pos. 6, threading clutches, stock stand and reel , coolant pump, very low running hours, revised in year 2018

video link: https://youtu.be/VQDHFpXuD08

-sold-
package with 2 pieces CNC controlled multi spindle automatic lathes, used
inclusive a lot of equipment

-sold-
6 main spindles, pick up for rear machining in position 7 inclusive double slide (XX6), 1x tool drive clutch, various tool holder like pictures, motorized cross slide in position 2 and 5, coolant- and chip box with coolant pumps and magnetic drum filter, magnetic chip conveyor, machine control: Siemens PLC Simatic S7 in combination with Siemens OP7 panel, barloader IEMCA SIR 25F [bundle type], oil mist filter,
(basic prepared material feeding in pos. 3)

-sold-
6 main spindles, pick up for rear machining in position 6, coolant pump, additional coolant pump with magnetic candle filter, [prepared for 2. material feed in position 3, currently option not complete], cleaned and revised, prepared for Iemca barloader

 

-sold-
6-spindle screw machine, cnc compound slide pos. 4, high pressure pump 20 bar, fire extinguishing system Kraft & Bauer, coolant unit, chip conveyor, barloader Iemca PRA 52/42/F.

-sold-
stepless Dnt-drive, Hirth coupled spindle drum, thread clutches, scraper chip conveyor, Pietro Cucchi integrated barloader
prepared for (not included): production cycle 2x3 (material feed in pos. 3+6), pick up in pos. 3+6
Videolink: https://youtu.be/JQ39kuHtN1I

-sold-
6 main spindles, pick up for rear machining, threading clutches (actually used for pick up drive), sorting slip, independent feed in pos. 4, motorized cross slides in position 4 and 5, coolant box with drag chip conveyor, coolant pump, additional coolant pump with magnetic candle filter, work piece belt, the machine is cleaned and revised.
bar loader IEMCA PRA 52/38P (yob. 2001) rack type magazine

video link: https://youtu.be/Ut0oW5PD9x4

-sold-
cam controlled multispindle screw machine with 8 main spindles
amongst others, the machine is suited for machining 2 parts in 1 cycle (double cross slide in pos. 3 and 7), pick up in pos. 7 (pos. 7 cross slide with double slide for rear machining), control Siemens S7, 2 tool-drive-clutches, coolant-/ chip-box with pump and chip conveyor brand "Ruez", bar loader Iemca PRA40/33P (rack type), tool holders like pictures, documentation in German/Italian.

Videolink: https://youtu.be/oWWHS679AgQ

-sold-
with various tooling revolvers, brand “Knoll” high pressure coolant pump with 3 turbo filters 50µm, hinge chip conveyor brand “Knoll”, active machine cooling system, integrated material bar loader IEMCA SIR for max. 3300mm bars, oil mist filter, fire extinguishing system brand “Kraft & Bauer”, more details on request

-sold-
8 main spindles, pick up for rear machining (currently not mounted, but in scope of delivery), threading clutches, Independent feed in position 5, 2x sloping recessing unit, 2x longitudinal turning slide, 2x recessing slide 47N, a lot of clamping heads and Rs-feed finger, bar loader IEMCA PRA40/42/P, Chip conveyor: drag type, coolant pump, high pressure coolant pump and filter unit, oil mist filter, Siemens Simatic S5, electronic trip dog control: Balluff, Brass/oil running

-sold-
CNC multispindle automatic lathe, 8 spindle machine, good equipped
http://www.youtube.com/watch?v=_m4X1m_rvrM

-sold-
CNC multispindle automatic lathe in top condition
video:http://youtu.be/B4A9KqoOnt8;