TLAČNICE I PUNČE
Manufacturer: Georg - Neitersen (Westerwald)
type: PEEG 400-1B
Year of manufacture: 1960 / 2012
Retrofit: 2012 - mechanics & electrics
Maximum pressure force: 400 t
Stroke adjustment: 30 to 180 mm
Ram adjustment: 160 mm
Stroke rate: 32 strokes/min
Power: 27 kW
Throat: 500 mm
T-slots: 32 DIN 650
Maximum tool installation dimension: 625 mm
Table surface: W x D - 1600 x 900 mm
Ram area: W x D - 1200 x 800 mm
Space requirement of the press: W x D x H - 1600 x 2150 x 3600 mm
Weight: approx. 27 t
Retrofit in 2012: Since 2012 only approx. 20,000 operating hours
Overhaul of the mechanics including renewal of the countershaft, the drive gear, the front stator bearing, the eccentric shaft, the connecting rod bearing, the clutch-brake combination, overhaul of the lubrication, repainting of the press (manual)
Overhaul of the electrical system including upgrade of the control system to Siemens S7-300, control system CPU313C 2 DP (software available), Siemens touch panel via Profibus interface, Siemens soft starter of the main drive, integration of automatic lubrication incl. electrical lubrication monitoring, new circuit diagrams completely available.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
pressing force: 160to
yob: 12/1993
stroke rate: 20 - 150 1/min
stroke height: 20 - 120 mm
ram adjustment: 1 - 100 mm
installation height: 550 mm
Table clamping surface approx.: 1,150 x 900 mm
Plunger clamping surface approx.: 1,100 x 700 mm
Drop-through opening in the table: 1000 x 330 mm
Control system: Siemens
Unidor monitoring system
Including roller feed:
Manufacturer: Zehnder & Sommer
Type: EV 420 AG
Year of construction: 2009
Belt width max. / 420 mm
Sold without oiler, without roller block bars,
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
total nominal force: 400to
frame type: 2-column, monobloc
Drive system: hydraulic
PLC: Siemens SIMATIC S7
Stand is cracked, machine must be repaired or cannibalised.
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: hydraulic parallel lifting system for big tools, press tools
Manufacturer: POWER-HYDRAULIK
Type: Power-Truck PT 040
Yob: 12/1999
total lifting force: 400 kN (40to)
number of lifting cylinders: 4 pieces
Lifting force per lifting cylinder: 100 kN
The Power-Truck is a parallel lifting system in compact design, for the handling of large tools, for working in, dismantling and assembling. The upper part of the tool can be lifted and lowered evenly with 4 double-acting lifting cylinders. A sufficient number of step sets allows lifting to the desired height. A step set consists of a cylinder attachment and a piston attachment. All accessories and system parts are accommodated in the mobile system trolley. The Power Truck is designed for a lifting force of max. 400 kN (100 kN per lifting cylinder).
Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com